Paper
7 August 1998 Q-switching and tuning of flashlamp-pumped Ti:sapphire laser with electro-optic crystal
Xiaoquan Sun, Xingwang Chen, Ziyao Li, Shaotang Yin, Lusheng Wu, Jianping Xie
Author Affiliations +
Abstract
This paper is to introduce the principle and the experimental operation of Q-switching and tuning of flashlamp pumped Ti:Sapphire laser with electro-optic crystal. A LiNbO3 (LN) crystal (13.8 X 14.7 X 46.5 mm3), a quartz quarter wave plate (204 micrometer in thickness), and a Glan prism were inserted in the cavity. Before a Q-switching voltage was applied to the LN crystal, the loss corresponding to quite wide wavelength band was high, the oscillation of the laser was prevented. The Q switching was achieved with the voltage on, different voltage corresponding to different wavelength at which the laser had the highest Q figure. The Q- switching and the tuning of the laser was achieved at the same time in this way.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaoquan Sun, Xingwang Chen, Ziyao Li, Shaotang Yin, Lusheng Wu, and Jianping Xie "Q-switching and tuning of flashlamp-pumped Ti:sapphire laser with electro-optic crystal", Proc. SPIE 3549, High-Power Lasers: Solid State, Gas, Excimer, and Other Advanced Lasers II, (7 August 1998); https://doi.org/10.1117/12.344106
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Crystals

Q switches

Electro optics

Sapphire lasers

Laser crystals

Wave plates

Quartz

RELATED CONTENT


Back to Top