Paper
2 June 1999 Semi-active vibration control with piezoelectric materials as variable-stiffness actuators
Author Affiliations +
Abstract
In this paper, a semi-active control law is used to switch the electrical shunt circuit of a piezoelectric actuator for energy dissipation in a simple mechanical system. Switching is done between open-circuit (high stiffness) and short- or resistive-circuit (low stiffness) states. The actuator is held in its high stiffness state when the system is moving such that energy can be stored in the actuator. When the system's motion would cause it to receive energy back from the actuator, the actuator is switched to a low stiffness state, dissipating the energy. In this numerical study, the state- switched piezoelectric system is used to suppress motions in flexural bending problem.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
William W. Clark "Semi-active vibration control with piezoelectric materials as variable-stiffness actuators", Proc. SPIE 3672, Smart Structures and Materials 1999: Passive Damping and Isolation, (2 June 1999); https://doi.org/10.1117/12.349775
Lens.org Logo
CITATIONS
Cited by 41 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Ferroelectric materials

Vibration control

Switching

Control systems

Aluminum

Acoustics

Back to Top