Edge lithography as a means of extending the limits of optical and nonoptical lithographic resolution

Steven J. Holmes; Toshiharu Furukawa; Mark C. Hakey; David V. Horak; Paul A. Rabidoux; K. Rex Chen; Wu-Song Huang; Mahmoud Khojasteh; Niranjan Patel

doi:10.1117/12.350218

11 June 1999 Edge lithography as a means of extending the limits of optical and nonoptical lithographic resolution

Steven J. Holmes, Toshiharu Furukawa, Mark C. Hakey, David V. Horak, Paul A. Rabidoux, K. Rex Chen, Wu-Song Huang, Mahmoud Khojasteh, Niranjan Patel

Author Affiliations +

Proceedings Volume 3678, Advances in Resist Technology and Processing XVI; (1999) https://doi.org/10.1117/12.350218
Event: Microlithography '99, 1999, Santa Clara, CA, United States

Abstract

Lithographic scaling entails continuously increasing resolution while at the same time improving the tolerance control on the printed images. Typically, this has been done by using shorter actinic wavelengths, increasing numerical aperture, compensating reticle patterns and similar methods that serve to enhance the fidelity of the aerial image. In some case, this scaling has been achieved by altering the method of image formation, such as with the use of alternating phase shift reticles, in which the width of the aerial image is established by phase interference rather than of a diffraction-limited process of passing light through a dark masking pattern. This paper describes development of a resist material that provides a new way to scale lithographic patterns, one similar to alternating phase shift lithography in the sense that it prints the edge of an aerial image rather than the entire image as a single pattern. Because the edge of the aerial image is of higher resolution, with smaller components of tolerance than the entire image, this type of resist may provide a new method of scaling.

Citation Download Citation

Steven J. Holmes, Toshiharu Furukawa, Mark C. Hakey, David V. Horak, Paul A. Rabidoux, K. Rex Chen, Wu-Song Huang, Mahmoud Khojasteh, and Niranjan Patel "Edge lithography as a means of extending the limits of optical and nonoptical lithographic resolution", Proc. SPIE 3678, Advances in Resist Technology and Processing XVI, (11 June 1999); https://doi.org/10.1117/12.350218

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE