Optimization of substrate reflectivity, resist thickness, and resist absorption for CD control and resolution

Johannes van Wingerden

doi:10.1117/12.354408

26 July 1999 Optimization of substrate reflectivity, resist thickness, and resist absorption for CD control and resolution

Johannes van Wingerden

Author Affiliations +

Proceedings Volume 3679, Optical Microlithography XII; (1999) https://doi.org/10.1117/12.354408
Event: Microlithography '99, 1999, Santa Clara, CA, United States

Abstract

Improvement of CD control can be achieved by reduction of substrate reflectivity effects. On highly reflective substrates such as metals, dyed resists are used most of the time. Especially for poly gate level patterning, the use of Bottom Anti Reflective Coatings has become common practice. While originally organic BARCs dominated, interest is gradually shifting towards inorganic BARCs of the SiOxNy type. Their highly conformal deposition now really allows for tuning towards zero reflectivity, even on substrates with topography. Furthermore, the use of inorganic BARC as a hard mask for etching allows for a thinner resist layer. This reduction of the resist thickness is advantageous for obtaining high resolution. It should be realized, however, that while resist thickness reduction improves resolution, it increases CD swing effects. Also, increased resists absorption reduces CD swing, but negatively influences resolution on substrates with a low reflectivity. THus, while resist absorption, resist thickness and substrate reflectivity can be used as parameters to optimize process performance, optimum conditions for CD control and resolution are generally different. The subject of this paper is how to determine optimum values for resist absorption, resist thickness and substrate reflection. We quantify the effect of these parameters on both CD control and resolution. Furthermore, requirements for BARC parameter variations are discussed. Finally, practical boundary conditions on increasing resist absorption and thickness for better CD control are determined.

Citation Download Citation

Johannes van Wingerden "Optimization of substrate reflectivity, resist thickness, and resist absorption for CD control and resolution", Proc. SPIE 3679, Optical Microlithography XII, (26 July 1999); https://doi.org/10.1117/12.354408

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE