Paper
19 March 1999 Infrared thermography for process control and predictive maintenance purposes in a steel wire drawing machine
Andres E. Rozlosnik, Victor Manuel Lardone
Author Affiliations +
Abstract
The industrial drawing process reduces the section of the wire rod by pulling the material through a hard die. This process generates heat by deformation and friction. The heat generated must be immediately removed after every reduction diameter step, otherwise the final quality of wire and the drawing performance will be poor. That is the reason why the improvement of the cooling efficiency in the drawing machine is of great importance. The better the cooling efficiency, the greater the wire quality and the productivity of the process will be. Nowadays, the infrared thermography control offer the possibility to analyze how the drawing aspect is affecting the cooling efficiency and how this technique allows the drawing process improvements. As you look at the capstans in the wire process control, you are doing at the same time, predictive maintenance in the machine.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andres E. Rozlosnik and Victor Manuel Lardone "Infrared thermography for process control and predictive maintenance purposes in a steel wire drawing machine", Proc. SPIE 3700, Thermosense XXI, (19 March 1999); https://doi.org/10.1117/12.342282
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cameras

Thermography

Carbon

Cooling systems

Metals

Infrared radiation

Manufacturing

Back to Top