Paper
20 September 1999 Visibility of fabricating an electro-optic sensor using LiNbO3 crystal implanted Mn ions
Abdalla M. Darwish, Eric K. Williams, Dariush Ila, David B. Poker, Dale K. Hensley
Author Affiliations +
Abstract
The effect of the ion implantation of Fe, Mn on LiNbO3, as well as the dispersion of Ag colloids in LiNbO3 were studied using electron paramagnetic resonance (EPR). EPR measurements on these crystals were performed as a function of fluence at room temperature. The fluence was 1 X 1014 and 1 X 1016 ions/cm2 for Fe and 2 X 1016 ions/cm2 for Ag. The unpaired carrier concentration increases with increasing fluence. The photosensitivity of these crystals was determined by observing in situ the effect of the laser illumination on the EPR signal and measuring the decay and growth of the EPR signal. EPR and optical absorption showed significant differences in the dispersion of the colloids with implant temperature and implant order.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Abdalla M. Darwish, Eric K. Williams, Dariush Ila, David B. Poker, and Dale K. Hensley "Visibility of fabricating an electro-optic sensor using LiNbO3 crystal implanted Mn ions", Proc. SPIE 3801, Photorefractive Fiber and Crystal Devices: Materials, Optical Properties, and Applications V, (20 September 1999); https://doi.org/10.1117/12.363949
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Crystals

Iron

Silver

Manganese

Crystallography

Ions

Electro optical sensors

Back to Top