Increase of hole-drilling speed by using packs of laser pulses

Sergey G. Gorny; A. M. Grigoriev; Vitaliy A. Lopota; Gleb A. Turichin

doi:10.1117/12.364226

20 September 1999 Increase of hole-drilling speed by using packs of laser pulses

Sergey G. Gorny, A. M. Grigoriev, Vitaliy A. Lopota, Gleb A. Turichin

Author Affiliations +

Proceedings Volume 3822, Computer-Controlled Microshaping; (1999) https://doi.org/10.1117/12.364226
Event: Industrial Lasers and Inspection (EUROPTO Series), 1999, Munich, Germany

Abstract

For realization of the optimum mode of hole drilling the packs of laser pulses of high intensity were used, when average level of intensity of radiation is not too high, that reduces specific energy of destruction, and the peak intensity is reasonably great, that the pulse of pressure of effect at evaporation has completely deleted the liquid from the zone of processing. The high peak intensity of radiation permits in this case to place a target not in focus of a optical system, creating on its surface the image with the help of masks. It permits to receive in metal plates the holes of any section, to execute marking of surfaces and deep engraving of sample material with the help of laser. With the using of focused radiation the cutting of thin materials can be executed without a auxiliary gas. The condition of melt replacement is excess of power of recoil pressure above the power of viscous forces and forces of inertia. The decision of the hydrodynamic problem permits to evaluate the necessary parameters of laser radiation, frequency and longitude of packs of pulses which provide increases of process speed in several times. The conducted experiments confirm the indicated theoretical analysis of process of removing of the material under action of packs of pulses of laser radiation. The given process is realized in laser technological installations for holes drilling and marks of materials.

Citation Download Citation

Sergey G. Gorny, A. M. Grigoriev, Vitaliy A. Lopota, and Gleb A. Turichin "Increase of hole-drilling speed by using packs of laser pulses", Proc. SPIE 3822, Computer-Controlled Microshaping, (20 September 1999); https://doi.org/10.1117/12.364226

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE