Paper
30 December 1999 Performance of the EL-4+ maskwriter for advanced chrome on glass reticles
Neal Caldwell, Raymond Jeffer, Mark Lawliss, John G. Hartley
Author Affiliations +
Abstract
The IBM EL-4+ maskmaker, installed in the Advanced Mask Facility in Burlington site has been undergoing extensive evaluation of its ability to fabricate advanced 4X chrome on glass (COG) reticles. In previous years on 1X x-ray masks, the EL-4+ maskmaker has demonstrated image placement of 20 nm 3(sigma) , minimum feature size to 100 nm, image size uniformity to below 10 nm while maintaining availability of 97% during the last 6 months of 1998. So far, in 1999, the EL- 4+ system has demonstrated minimum etched features to 100 nm in COG using ZEP7000 resist and dry etching. Promising results have also been achieved using a gate level 0.18 micrometer ground rule mask as a learning vehicle. COG learning is continuing, with indications that we should be able to achieve 35 nm image placement. There are a number of significant advantages to be realized in COG reticle fabrication on the EL-4+. Resolution, coupled with a 1/640 tool grid permits features to be patterned with sharp corners and precisely located edges without any impact on writing speed. An advanced proximity correction algorithm exploiting the systems dose modulation capabilities insures image fidelity across a wide spectrum of pattern density.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Neal Caldwell, Raymond Jeffer, Mark Lawliss, and John G. Hartley "Performance of the EL-4+ maskwriter for advanced chrome on glass reticles", Proc. SPIE 3873, 19th Annual Symposium on Photomask Technology, (30 December 1999); https://doi.org/10.1117/12.373344
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Glasses

Reticles

Image processing

X-rays

Control systems

Etching

Back to Top