Analysis of an optical energy interrupter for MEMS-based safety and arming systems

Michael A. Beamesderfer; Steve Chen; Don L. DeVoe; Edward Litcher; Kenneth Johnson

doi:10.1117/12.359359

18 August 1999 Analysis of an optical energy interrupter for MEMS-based safety and arming systems

Michael A. Beamesderfer, Steve Chen, Don L. DeVoe, Edward Litcher, Kenneth Johnson

Proceedings Volume 3880, MEMS Reliability for Critical and Space Applications; (1999) https://doi.org/10.1117/12.359359
Event: Symposium on Micromachining and Microfabrication, 1999, Santa Clara, CA, United States

Abstract

This paper describes an investigation into the development of a LIGA optical energy interrupter for use in a MEMS-based Safety and Arming (S&A) system. The energy interrupter acts as a switch to selectively couple optical power between input and output fiber optic waveguides using either a reflectance or direct coupling technique. This device is a critical component of the S&A system, which must perform its task in a zero-tolerance manner to ensure reliable and safe operation of naval ordnance. The union of fiber optic components with LIGA-based MEMS structures allows development of an energy interruption junction that will isolate the low and high voltage sections of an optical charging circuit. A movable LIGA barrier interacts with optical fibers in order to align or misalign the optical propagation path between the source and receiver in the circuit. The implementation of such a design allows for the `Safe' operational mode of an S&A system with the optic path broken, and an `Arm' mode during energy transfer. Effects such as fiber misalignment, light scattering, and multiple reflections are sources of potential failure modes for this micromachined optical system. This paper is concerned with the effects of fiber misalignment of system reliability. Three primary fiber/barrier topologies are discussed. Computer simulations used to establish the positioning and geometric tolerances in the MEMS structure to ensure maximum functional reliability are described, and experimental results are presented.

Citation Download Citation

Michael A. Beamesderfer, Steve Chen, Don L. DeVoe, Edward Litcher, and Kenneth Johnson "Analysis of an optical energy interrupter for MEMS-based safety and arming systems", Proc. SPIE 3880, MEMS Reliability for Critical and Space Applications, (18 August 1999); https://doi.org/10.1117/12.359359

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available