Comparison of 2D temperature maps recorded during laser-induced thermal tissue treatment with corresponding temperature distributions calculated from 3D Monte-Carlo simulations

Harald Busse; Martin Bublat; Ralf Ratering; Margarethe Rassek; Hans-Joachim Schwarzmaier M.D.; Thomas Kahn M.D.

doi:10.1117/12.384900

3 May 2000 Comparison of 2D temperature maps recorded during laser-induced thermal tissue treatment with corresponding temperature distributions calculated from 3D Monte-Carlo simulations

Harald Busse, Martin Bublat, Ralf Ratering, Margarethe Rassek, Hans-Joachim Schwarzmaier M.D., Thomas Kahn M.D.

Author Affiliations +

Proceedings Volume 3911, Biomedical Diagnostic, Guidance, and Surgical-Assist Systems II; (2000) https://doi.org/10.1117/12.384900
Event: BiOS 2000 The International Symposium on Biomedical Optics, 2000, San Jose, CA, United States

Abstract

Minimally invasive techniques often require special biomedical monitoring schemes. In the case of laser coagulation of tumors accurate temperature mapping is desirable for therapy control. While magnetic resonance (MR)-based thermometry can easily yield qualitative results it is still difficult to calibrate this technique with independent temperature probes for the entire 2D field of view. Calculated temperature maps derived from Monte-Carlo simulations (MCS), on the other hand, are suitable for therapy planning and dosimetry but typically can not account for the extract individual tissue parameters and physiological changes upon heating. In this work, online thermometry was combined with MCS techniques to explore the feasibility and potential of such a biomodal approach for surgical assist systems. For the first time, the result of a 3D simulation were evaluated with MR techniques. An MR thermometry system was used to monitor the temperature evolution during laser-induced thermal treatment of bovine liver using a commercially available water-cooled applicator. A systematic comparison between MR-derived 2D temperature maps in different orientations and corresponding snapshots of a 3D MCS of the laser-induced processes is presented. The MCS is capable of resolving the complex temperature patterns observed in the MR-derived images and yields a good agreement with respect to absolute temperatures and damage volume dimensions. The observed quantitative agreement is around 10 degrees C and on the order of 10 percent, respectively. The integrated simulation-and-monitoring approach has the potential to improve surgical assistance during thermal interventions.

Citation Download Citation

Harald Busse, Martin Bublat, Ralf Ratering, Margarethe Rassek, Hans-Joachim Schwarzmaier M.D., and Thomas Kahn M.D. "Comparison of 2D temperature maps recorded during laser-induced thermal tissue treatment with corresponding temperature distributions calculated from 3D Monte-Carlo simulations", Proc. SPIE 3911, Biomedical Diagnostic, Guidance, and Surgical-Assist Systems II, (3 May 2000); https://doi.org/10.1117/12.384900

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available