Paper
12 July 2000 Design of large pupil relief broadband collimator for use in a MMW/IR HWIL facility
Author Affiliations +
Abstract
Optical Sciences Corporation has designed and implemented a 116 inch exit pupil relief optical system for dynamic infrared scene projection to flight table mounted seekers at the U.S. Army Missile Command (AMCOM) Research, Development, and Engineering Center (RDEC). The optical system collimates the output from a 512 X 512 element resistor array in the 3 - 5 micrometer waveband. The large pupil stand-off is necessary to support projector operation in a millimeter wave (MMW) anechoic chamber. The facility is designed to stimulate a common aperture, dual-band seeker with millimeter wave and IR imagery via a dichroic beam combiner. The dichroic beam combiner is located in the anechoic chamber and reflects the IR scene while transmitting MMW signals. The optical system exhibits distortion of less than 0.5% over the full field of view and chromatic focal shift of less than 10% of the diffraction limited range. The performance of the system is limited by the diffraction limit. This document describes the simulation environment and arrangement, outlines the design procedure from predesign and achromatization to final tolerancing, and presents final test data and sample imagery.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Matt W. Bender and D. Brett Beasley "Design of large pupil relief broadband collimator for use in a MMW/IR HWIL facility", Proc. SPIE 4027, Technologies for Synthetic Environments: Hardware-in-the-Loop Testing V, (12 July 2000); https://doi.org/10.1117/12.391687
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Collimators

Extremely high frequency

Projection systems

Infrared radiation

Distortion

Infrared imaging

Optical components

Back to Top