Paper
12 July 2000 Factory acceptance test results for the DIRSP projection optics
Matthew C. Thomas, Craig S. Ward
Author Affiliations +
Abstract
The Factory Acceptance Test (FAT) results for the projection optical subsystem (POS) of US Army STIRCOM's dynamic infrared scene projector (DIRSP) are presented in this paper. DIRSP is a low background (-35 degrees Celsius) hardware-in-the- loop (HWIL), long-wave infrared (LWIR) scene projector built by Mission Research Corporation (MRC) for use by the Redstone Technical Test Center (RTTC). It has an effective emitter array size of 1632 X 672 suspended-membrane micro-resistor elements. The POS is responsible for generating this effective array size from three smaller arrays using a mosaic image combiner, adding background light from an external blackbody, and collimating the combined radiation with a 5:1 vacuum enclosed -35 degree Celsius zoom lens. The FAT results reported demonstrate good POS performance compared to the design for focal length, F/#, MTF and apparent temperature.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Matthew C. Thomas and Craig S. Ward "Factory acceptance test results for the DIRSP projection optics", Proc. SPIE 4027, Technologies for Synthetic Environments: Hardware-in-the-Loop Testing V, (12 July 2000); https://doi.org/10.1117/12.391694
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Nonuniformity corrections

Cameras

Temperature metrology

Zoom lenses

Image quality

Modulation transfer functions

Projection systems

Back to Top