Paper
15 November 2000 Polarimetric imaging using a continuously spinning polarizer element
Author Affiliations +
Abstract
To derive the polarization characteristics of a remotely sensed object, a time-sequential polarimeter must create multiple polarization response states during the course of each measurement set. A common method of creating these states is to rotate a polarizer element to a discrete location and hold that position while the detectors integrate and are sampled. The polarizer element is then rotated to the next position and the process is repeated. This time-sequential, advance-and-hold technique is widely used and easily understood because of its simplicity. However, it is not well suited for remote sensing applications where time delays caused by the advance-and-hold mechanism can limit measurement speed and reduce measurement accuracy. This paper introduces a continuously spinning polarizer (CSP) technique that eliminates the time delays and associated problems of an advance-and-hold polarimeter. A performance model for a linear Stokes polarimeter containing a CSP is derived, and a demonstration of the CSP technique based on the performance of the hyper-spectral imaging polarimeter (HIP) is presented.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
James Q. Peterson, Gary L. Jensen, Joseph A. Kristl, and Joseph A. Shaw "Polarimetric imaging using a continuously spinning polarizer element", Proc. SPIE 4133, Polarization Analysis, Measurement, and Remote Sensing III, (15 November 2000); https://doi.org/10.1117/12.406638
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polarizers

Polarimetry

Sensors

Polarization

Transmittance

Optical components

Signal attenuation

Back to Top