Paper
13 December 2000 Temperature profile of IR-blocking windows used in cryogenic x-ray spectrometers
Stephan Friedrich, Timothy B. Funk, Owen B. Drury, Simon E. Labov
Author Affiliations +
Abstract
Cryogenic high-resolution X-ray spectrometers are typically operated with thin IR blocking windows to reduce radiative heating of the detector while allowing good x-ray transmission. We have estimated the temperature profile of these IR blocking windows under typical operating conditions. We show that the temperature in the center of the window is raised due to radiation from the higher temperature stages. This can increase the infrared photon flux onto the detector, thereby increasing the IR noise and decreasing the cryostat hold time. The increased window temperature constrains the maximum window size and the number of windows required. We discuss the consequences for IR blocking window design.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Stephan Friedrich, Timothy B. Funk, Owen B. Drury, and Simon E. Labov "Temperature profile of IR-blocking windows used in cryogenic x-ray spectrometers", Proc. SPIE 4140, X-Ray and Gamma-Ray Instrumentation for Astronomy XI, (13 December 2000); https://doi.org/10.1117/12.409143
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Aluminum

Cryogenics

X-rays

Reflection

Spectrometers

Solids

Back to Top