Paper
18 August 2000 Design and fabrication of a self-aligning gas/liquid micropump
Christian G. J. Schabmueller, Michael Koch, Alan G. R. Evans, Arthur Brunnschweiler, Michael Kraft
Author Affiliations +
Proceedings Volume 4177, Microfluidic Devices and Systems III; (2000) https://doi.org/10.1117/12.395671
Event: Micromachining and Microfabrication, 2000, Santa Clara, CA, United States
Abstract
This paper reports the design, fabrication and testing of silicon based micropump for liquid and gases. This piezoelectrically driven membrane pump is designed to be tolerant to gas-bubbles and to be suitable for self-priming. Reducing the dead volume within the pump, and thus increasing the compression ration, achieves the gas pumping. The main advantage of the pump described in the paper is the self-aligning of the membrane unit to the valve unit and the possibility of using screen printed PZT as actuator, which enables mass production and thus very low-cost micropumps. Dynamic passive valves are used, as those valves are very reliable having no moving parts and being not sensitive to smaller particles. Furthermore they can follow high frequencies, hence allowing the pump to run at resonance frequency enabling the maximum deflection of the diaphragm. First tests carried out on the micropump have produced promising results.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Christian G. J. Schabmueller, Michael Koch, Alan G. R. Evans, Arthur Brunnschweiler, and Michael Kraft "Design and fabrication of a self-aligning gas/liquid micropump", Proc. SPIE 4177, Microfluidic Devices and Systems III, (18 August 2000); https://doi.org/10.1117/12.395671
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Ferroelectric materials

Gases

Liquids

Microfluidics

Particles

Silicon

Back to Top