Paper
6 June 2001 Tunable multisection Fabry-Perot laser
Lalitha Ponnampalam, Richard G. S. Plumb, S. Naseem
Author Affiliations +
Abstract
A simple tunable laser structure with quasi-continuous tuning range of 15 nm, more than 30 dB side mode suppression ratio, 400 kHz linewidth and low variation in output power over the tuning range is demonstrated. The device involved minor modifications to a standard Fabry Perot (FP) laser and measurements have confirmed modeled predictions. Prototype fabrication has used focussed ion beam etching to generate three reflection/scattering sites with power reflectivity of approximately 1%, at precise locations along the optical axis of a 1500 nm FP laser. The device contact was electrically split at these reflection/scattering sites, thereby generating weak FP cavities within a strong primary FP cavity. Tuning is achieved by precisely changing the currents to each section and hence altering the refractive indices.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lalitha Ponnampalam, Richard G. S. Plumb, and S. Naseem "Tunable multisection Fabry-Perot laser", Proc. SPIE 4287, In-Plane Semiconductor Lasers V, (6 June 2001); https://doi.org/10.1117/12.429795
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Tunable lasers

Ion beams

Modulation

Reflectors

Temperature metrology

Spectrum analysis

Back to Top