Paper
18 May 2001 Si/Si1-xGex/Si low-loss waveguides fabricated using selective epitaxial growth
Adrian P. Vonsovici, Souren P. Pogossian, Lili Vescan
Author Affiliations +
Abstract
The realisation of two-dimensional Si/Si1-xGex/Si strained layer low-loss waveguides (1.7 dB/cm at 1.3micrometers ) is reported. The waveguide structure is grown using selective epitaxy. This fabrication method insures loosened cut-off and critical thickness conditions as demonstrated previously by the room-tem-perature operation of vertical emitting SiGe/Si LED. The main difference from other fabrication methods is the local deposition of the SiGe in a finite stripe region while in the conventional fabrication of rib waveguides the SiGe layer is deposited on an entire wafer and then patterned by reactive ion etching. The relative high amount of Ge (19%) incorpo-rated in selectively grown waveguides, and reduced thickness (0.6micrometers ) of Si cap layer are improvements from the previous reported SiGe/Si waveguides where thick Si cap layers (few microns) and reduced Ge concentrations (<10%) are necessary in order to obtain waveguiding.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Adrian P. Vonsovici, Souren P. Pogossian, and Lili Vescan "Si/Si1-xGex/Si low-loss waveguides fabricated using selective epitaxial growth", Proc. SPIE 4293, Silicon-based and Hybrid Optoelectronics III, (18 May 2001); https://doi.org/10.1117/12.426925
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Silicon

Germanium

Semiconducting wafers

Epitaxy

Polarization

Light emitting diodes

RELATED CONTENT


Back to Top