Paper
1 February 2001 Finite element modeling of smart composite plates reinforced by NiTi shape memory alloy wires
Dipo Onipede Jr., Ilya Valerievich Avdeev, Gaetano Sterlacci
Author Affiliations +
Proceedings Volume 4348, Fourth International Workshop on Nondestructive Testing and Computer Simulations in Science and Engineering; (2001) https://doi.org/10.1117/12.417670
Event: Fourth International Workshop on Nondestructive Testing and Computer Simulations in Science and Engineering, 2000, St. Petersburg, Russian Federation
Abstract
An SMA material model for use with finite element analysis is presented. Experimental results conducted to demonstrate and verify the concept closely matched the results obtained from FEA. Both one-dimensional and three-dimensional variations of the material models were used in the FE analysis. The one- dimensional SMA model was used to model the active twisting of a beam while the three-dimensional model was used to investigate stresses developed in a SMA reinforced smart composite plate. Surface-to-surface contact algorithms, nonlinear kinematics and nonlinear material model of SMA were used in FE analysis. A two-step approach was developed in order to analyze behavior of smart composite plates reinforced by SMA wires. Results from the analysis of changing the shape of wing prototype are also presented.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dipo Onipede Jr., Ilya Valerievich Avdeev, and Gaetano Sterlacci "Finite element modeling of smart composite plates reinforced by NiTi shape memory alloy wires", Proc. SPIE 4348, Fourth International Workshop on Nondestructive Testing and Computer Simulations in Science and Engineering, (1 February 2001); https://doi.org/10.1117/12.417670
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Shape memory alloys

Composites

3D modeling

Finite element methods

Prototyping

Actuators

Aerodynamics

Back to Top