Paper
10 December 2001 Improved optimization method for designing a doublet lens
Wen-Shing Sun, Hong Chang, Ching-Cherng Sun, Ming-Wen Chang, Chuen-Lin Tien
Author Affiliations +
Abstract
We presented an efficient method to achieve the optimized design of a doublet lens. Using the third-order aberrations to obtain directly a minimal area from the ray-fan diagram was suggested. We took the specification of F/#=3.333 and a half field of view 1 degree(s) as the design example. The optimization technique was utilized to control the third order aberrations such as spherical aberration and coma, and used the third-order spherical and coma aberrations to correct directly the on-axis aberrations. In order to minimize increasing the tendency of the off-axis aberration at the 1.0 field angle, during the correction of the on-axis aberration a small value, then had a tendency to increase. Our solution is taking the RMS value of spot diagram less than the diffraction limited value of point spread function (PSF) as an evaluated criterion for the on-axis aberrations. Finally, the optimized value of the system design is obtained by adjusting lens thickness and lens spacing. Two design examples of the doublet, one glass lens and one plastic lens, are well presented in this article.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wen-Shing Sun, Hong Chang, Ching-Cherng Sun, Ming-Wen Chang, and Chuen-Lin Tien "Improved optimization method for designing a doublet lens", Proc. SPIE 4442, Novel Optical Systems Design and Optimization IV, (10 December 2001); https://doi.org/10.1117/12.449968
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Lens design

Monochromatic aberrations

Diffraction

Chromatic aberrations

Point spread functions

Spherical lenses

Wavefronts

RELATED CONTENT

Bi-AGRIN Sphero-Apochromats
Proceedings of SPIE (December 17 2014)
Focusing Systems For High Energy Glass Lasers
Proceedings of SPIE (August 10 1977)
Diffraction performance calculations in lens design
Proceedings of SPIE (January 01 1991)
Design of a Cooke triplet by optimization technique
Proceedings of SPIE (December 10 2001)
Design methodology of a hybrid lens
Proceedings of SPIE (July 14 1999)
Image
Proceedings of SPIE (June 10 1987)

Back to Top