Paper
29 May 2002 Multisignal detecting system of pile integrity testing
Zuting Liu, Ying Luo, Shihai Yu
Author Affiliations +
Proceedings Volume 4537, Third International Conference on Experimental Mechanics; (2002) https://doi.org/10.1117/12.468816
Event: Third International Conference on Experimental Mechanics, 2002, Beijing, China
Abstract
The low strain reflection wave method plays a principal rule in the integrating detection of base piles. However, there are some deficiencies with this method. For example, there is a blind area of detection on top of the tested pile; it is difficult to recognize the defects at deep-seated parts of the pile; there is still the planar of 3D domino effect, etc. It is very difficult to solve these problems only with the single-transducer pile integrity testing system. A new multi-signal piles integrity testing system is proposed in this paper, which is able to impulse and collect signals on multiple points on top of the pile. By using the multiple superposition data processing method, the detecting system can effectively restrain the interference and elevate the precision and SNR of pile integrity testing. The system can also be applied to the evaluation of engineering structure health.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zuting Liu, Ying Luo, and Shihai Yu "Multisignal detecting system of pile integrity testing", Proc. SPIE 4537, Third International Conference on Experimental Mechanics, (29 May 2002); https://doi.org/10.1117/12.468816
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Neck

Sensors

Data processing

Signal to noise ratio

Signal detection

Electronic filtering

Reflection

RELATED CONTENT


Back to Top