Paper
16 April 2002 Optically pumped high-power fiber lasers
Theodore F. Morse
Author Affiliations +
Abstract
The power of laser diodes has increased in a spectacular fashion during recent years. The focus of this brief report will be to consider some of the problems associated with using high power diodes to pump fiber lasers and to discuss some of the schemes that have been proposed to overcome these problems. This is of particular importance at the present time because of recent interest in what might be termed extremely high power output. Over 100 W CW have already been obtained from a single Yb double clad fiber1, and elsewhere research is in progress to scale this up several orders of magnitude. At the present time, there are several sources of single mode fiber out put at 10-20 W, and one source is offering a single mode fiber laser of 100 W (IPG Polus)14. The Department of Defense has recently requested the submission of proposals for work that would lead to fiber lasers from 1 kW to 100 kW. This latter will clearly be concerned with the combination of multiple fiber lasers, and the aspect of coherent combination will not be considered in this presentation. It will be clear, however, that there is a need for design of fiber lasers that can efficiently utilize such very high diode pumping power.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Theodore F. Morse "Optically pumped high-power fiber lasers", Proc. SPIE 4648, Test and Measurement Applications of Optoelectronic Devices, (16 April 2002); https://doi.org/10.1117/12.462646
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Diodes

Ytterbium

Optical pumping

Diffraction gratings

Silica

Cladding

RELATED CONTENT

High gain ytterbium doped Ge pedestal large pitch fiber
Proceedings of SPIE (March 12 2014)
A double clad ytterbium fibre laser operating at 400°C
Proceedings of SPIE (March 04 2015)
Tapered fiber bundles for combining laser pumps
Proceedings of SPIE (April 22 2005)
Airclad fiber laser technology
Proceedings of SPIE (February 07 2008)
New method for side pumping of double clad fiber lasers...
Proceedings of SPIE (August 28 2009)
High-power photonic crystal fibers
Proceedings of SPIE (February 23 2006)

Back to Top