Optimal placement of piezoelectric sensor/actuator pairs for vibration control of composite plates

Shengyin Wang; Ser-Tong Quek; Kok Keng Ang

doi:10.1117/12.475258

10 July 2002 Optimal placement of piezoelectric sensor/actuator pairs for vibration control of composite plates

Shengyin Wang, Ser-Tong Quek, Kok Keng Ang

Proceedings Volume 4693, Smart Structures and Materials 2002: Modeling, Signal Processing, and Control; (2002) https://doi.org/10.1117/12.475258
Event: SPIE's 9th Annual International Symposium on Smart Structures and Materials, 2002, San Diego, California, United States

Abstract

The optimal placement of piezoelectric sensor/actuator (S/A) pairs to maximize the damping effect of a composite plate under a classical control framework using the finite element approach is investigated. Due to the discretization of the spatial domain, the problem falls under the class of discrete optimization. Two optimization performance indices based on modal and system controllability are adopted. The classical direct pattern search method is employed to obtain local optima. It is proposed that the starting point for the pattern search be selected based on the maxima of integrated principal strains consistent with the size of piezoelectric patches used, which would maximize the virtual work done by the equivalent actuation forces along the corresponding mechanical displacements. In this way, the global optimal placement can be efficiently deduced. Numerical simulation using a cantilever composite plate under free vibration shows that the proposed strategy to locate the optimal placement is practical and efficient, with results very close to the global optimal layout from exhaustive search. The speed of convergence is rapid compared to an initial blind discrete pattern search approach. For the specific example used, the S/A pairs positioned close to the support are most effective whereas those near the free end are the least effective, for the first two modes. S/A pairs placed furthest from the center line of the cantilever plate are most effective for torsional vibration control. These findings are in good agreement with the published results.

Citation Download Citation

Shengyin Wang, Ser-Tong Quek, and Kok Keng Ang "Optimal placement of piezoelectric sensor/actuator pairs for vibration control of composite plates", Proc. SPIE 4693, Smart Structures and Materials 2002: Modeling, Signal Processing, and Control, (10 July 2002); https://doi.org/10.1117/12.475258

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available