Paper
5 August 2002 Advanced laser sensing receiver concepts based on FPA technology
Phillip L. Jacobson, Roger R. Petrin, L. John Jolin, Bernard R. Foy, John L. Lowrance, George Renda
Author Affiliations +
Abstract
The ultimate performance of any remote sensor is ideally governed by the hardware signal-to-noise capability and allowed signal-averaging time. In real-world scenarios, this may not be realizable and the limiting factors may suggest the need for more advanced capabilities. Moving from passive to active remote sensors offers the advantage of control over the illumination source, the laser. Added capabilities may include polarization discrimination, instantaneous imaging, range resolution, simultaneous multi-spectral measurement, or coherent detection. However, most advanced detection technology has been engineered heavily towards the straightforward passive sensor requirements, measuring an integrated photon flux. The need for focal plane array technology designed specifically for laser sensing has been recognized for some time, but advances have only recently made the engineering possible. This paper will present a few concepts for laser sensing receiver architectures, the driving specifications behind those concepts, and test/modeling results of such designs.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Phillip L. Jacobson, Roger R. Petrin, L. John Jolin, Bernard R. Foy, John L. Lowrance, and George Renda "Advanced laser sensing receiver concepts based on FPA technology", Proc. SPIE 4721, Infrared Detectors and Focal Plane Arrays VII, (5 August 2002); https://doi.org/10.1117/12.478859
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Staring arrays

Receivers

Laser applications

Signal detection

LIDAR

Detector arrays

Back to Top