Paper
1 August 2002 Modification of boundaries conditions in the FDTD algorithm for EUV mask modeling
Author Affiliations +
Abstract
Rigorous modeling of diffraction from the mask is one of the most critical points in the extension of lithography simulation from its traditional spectral range between 150 and 500 nm into the area of extreme ultraviolet (EUV) between 10 and 15 nm. A typical EUV mask is made of a reflective multilayer (Mo/Si or Mo/Be for example) deposited on a substrate. Above the multilayer, a buffer layer acts as an etch stopper, and an absorber is used for the mask pattern. If we limit our scope to layers without defect, most of the mask parts can actually be described by analytical methods such as transfer matrices. Therefore we decided to split the mask into two parts : the first part includes the absorber and the buffer layer and it will be studied using a finite-difference time-domain (FDTD) algorithm, the second part includes the reflective multilayer and the substrate and it will be simply described by transfer matrices.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alexandre Vial, Andreas Erdmann, Thomas Schmoeller, and Christian K. Kalus "Modification of boundaries conditions in the FDTD algorithm for EUV mask modeling", Proc. SPIE 4754, Photomask and Next-Generation Lithography Mask Technology IX, (1 August 2002); https://doi.org/10.1117/12.476992
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Extreme ultraviolet

Photomasks

Finite-difference time-domain method

Reflectivity

Diffraction

Lithography

Algorithm development

RELATED CONTENT


Back to Top