Pulsed-laser deposited TiC coatings for MEMS

Gouri Radhakrishnan; Paul M. Adams; Ruby E. Robertson; Robert C. Cole

doi:10.1117/12.482097

13 September 2002 Pulsed-laser deposited TiC coatings for MEMS

Gouri Radhakrishnan, Paul M. Adams, Ruby E. Robertson, Robert C. Cole

Proceedings Volume 4760, High-Power Laser Ablation IV; (2002) https://doi.org/10.1117/12.482097
Event: International Symposium on High-Power Laser Ablation 2002, 2002, Taos, New Mexico, United States

Abstract

Titanium carbide (TiC) thin films have very desirable properties that make them ideally suited for applications to MEMS devices. TiC has been one of the preferred coatings for improving the performance of macroscopic moving mechanical components due to its established wear-resistance. Pulsed laser deposition (PLD) has been an excellent method for the deposition of TiC because unlike any other deposition process for TiC, PLD offers the capability of producing high-quality films even at room-temperature. Using a patented PLD technique, especially designed and optimized for the deposition of high-hardness, particulate-free films, we have deposited TiC coatings on a variety of surfaces, including Si and several MEMS compatible film-layers. Our results have demonstrated that TiC coatings also offer a high wear-resistance to Si surfaces. This, together with the excellent chemical and mechanical properties, and thermal stability of our PLD TiC coatings, has led to our application of TiC to moving MEMS devices fabricated from Si. The fabrication of Si MEMS devices is quite well established, however, the reliability and performance of MEMS devices such as microgears, micromotors and microactuators, which involve sliding Si surfaces, remain an open question. The short functional life of these devices is attributed to the excessive wear rate of Si induced by high friction. The work presented here describes a hybrid process whereby PLD is used in conjunction with the Aerospace MEMS fabrication process (AIMMOS) for inserting TiC coatings into critical interfaces in MEMS devices that would involve sliding contact between two Si surfaces. The PLD of TiC, the spectroscopy of the plume, and the properties and applications of PLD-TiC for MEMS will be discussed.

Citation Download Citation

Gouri Radhakrishnan, Paul M. Adams, Ruby E. Robertson, and Robert C. Cole "Pulsed-laser deposited TiC coatings for MEMS", Proc. SPIE 4760, High-Power Laser Ablation IV, (13 September 2002); https://doi.org/10.1117/12.482097

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available