Process bias control with thin Cr film blanks for 90-nm-node reticle fabrication

Yukihiro Sato; Hitoshi Handa; Yasuyuki Kushida; Satoru Asai; Hiroshi Maruyama; Yutaka Miyahara; Minoru Naito; Ryugo Hikichi; Yoji Kawasaki; Hiroyuki Miyashita; Shigeru Noguchi

doi:10.1117/12.467497

27 December 2002 Process bias control with thin Cr film blanks for 90nm-node reticle fabrication

Yukihiro Sato, Hitoshi Handa, Yasuyuki Kushida, Satoru Asai, Hiroshi Maruyama, Yutaka Miyahara, Minoru Naito, Ryugo Hikichi, Yoji Kawasaki, Hiroyuki Miyashita, Shigeru Noguchi

Author Affiliations +

Proceedings Volume 4889, 22nd Annual BACUS Symposium on Photomask Technology; (2002) https://doi.org/10.1117/12.467497
Event: Photomask Technology 2002, 2002, Monterey, CA, United States

Abstract

For today’s advanced reticle production, process bias should be reduced as possible, and be “zero” ideally, because of its negative impacts on CD control and pattern fidelity against minute features. In this paper, blanks with Cr film thinner than 100 nm were examined as promising materials to meet this demand. Results from two aspects, reticle production and lithographic performance, are presented. Dry etching properties such as etching bias, CD Linearity, impact on pattern-pitch were investigated. Thin Cr film blanks showed excellent results in process bias less than 50 % of conventional ones with proper etching conditions. They also showed about 50 %’s decrease of etching bias variations for pattern-pitch with smaller CD error in CD Linearity at the same time. Results of aerial image simulations showed possibilities of them as substitute of conventional binary blanks in ArF lithography. There was no impact of Cr film thinning on depth of focus and optical proximity effect with optimized exposure condition. These experimental results imply that Cr film thickness plays an important role to decide the qualities of reticle CD. Thinner Cr film blanks have capability to realize a 90 nm-node reticle with minimized process bias enough to produce fine OPC features.

Citation Download Citation

Yukihiro Sato, Hitoshi Handa, Yasuyuki Kushida, Satoru Asai, Hiroshi Maruyama, Yutaka Miyahara, Minoru Naito, Ryugo Hikichi, Yoji Kawasaki, Hiroyuki Miyashita, and Shigeru Noguchi "Process bias control with thin Cr film blanks for 90nm-node reticle fabrication", Proc. SPIE 4889, 22nd Annual BACUS Symposium on Photomask Technology, (27 December 2002); https://doi.org/10.1117/12.467497

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available