Paper
26 June 2003 Optimization of the contact layer for 90-nm node lithography
Author Affiliations +
Abstract
It is well known that shrinking k1 factors and increasing MEEF are making it more difficult to print contact holes with acceptable latitude and low defectivity. Given the decreasing process latitude this implies, choosing elements of the lithography process independently is becoming less and less of an option. Instead all elements of the lithography process need to be chosen so that a production-worthy process can be rapidly developed. The large number of options available for building a process further complicates the optimization problem. In this study, simulation results are used to explore the tradeoffs between illumination options and reticle substrate choice as applied to contact hole printing. Relative defectivity levels are presented from logic test circuits for selected cases of illumination and reticle type. These selected cases show that what improves defectivity also improves the Normalized Image Log-Slope (NILS). As it has been previously shown that NILS is already an excellent image quality metric NILS improvement will be used as the basis of the work presented in this paper. Extensive simulations will be used to determine the best choice of illumination and mask type to maximize NILS and by implication minimize defect density.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kirk J. Strozewski, Lena Zavyalova, and Kevin Lucas "Optimization of the contact layer for 90-nm node lithography", Proc. SPIE 5040, Optical Microlithography XVI, (26 June 2003); https://doi.org/10.1117/12.485419
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Nanoimprint lithography

Photomasks

Lithography

Phase shifts

Reticles

Binary data

Lithographic illumination

RELATED CONTENT

Illuminator optimization for projection printing
Proceedings of SPIE (July 26 1999)
Mask error factor impact on the 130-nm node
Proceedings of SPIE (July 05 2000)
Forbidden pitches for 130-nm lithography and below
Proceedings of SPIE (July 05 2000)
Alternatives to alternating phase-shift masks for 65 nm
Proceedings of SPIE (December 27 2002)
Low-k1 imaging: how low can we go?
Proceedings of SPIE (October 20 2000)

Back to Top