Paper
19 June 2003 Methods of alternating biased laser gyro resolution and bandwidth increase
Valery I. Gupalov, Andrei V. Mochalov
Author Affiliations +
Proceedings Volume 5066, Lasers for Measurements and Information Transfer 2002; (2003) https://doi.org/10.1117/12.501387
Event: Lasers for Measurements and Information Transfer 2002, 2002, St. Petersburg, Russian Federation
Abstract
Application of the laser gyro (LG) with an alternating bias for angular dynamic measurements runs into errors mainly caused by discrete output signal for level and time. We have developed a method of increasing LG resolution, based on formation of additional signals possessing a given phase shift with respect to two initial analog signals of variable frequency. The bandwidth of the LG is usually limited by twice the frequency of the alternating bias. This frequency is increased by further formation of time intervals symmetric with respect to the zeros of the "initial bias function" and representing the "inserted cycles" for determination of the increments of the LG output signal. The measurement error arising from the use of the developed method is estimated.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Valery I. Gupalov and Andrei V. Mochalov "Methods of alternating biased laser gyro resolution and bandwidth increase", Proc. SPIE 5066, Lasers for Measurements and Information Transfer 2002, (19 June 2003); https://doi.org/10.1117/12.501387
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Analog electronics

Phase shifts

Gyroscopes

Spectral resolution

Error analysis

Navigation systems

Sensors

Back to Top