Important considerations when using the Shack-Hartmann method for testing highly aspheric optics

Daniel G. Smith; Eric Goodwin; John E. Greivenkamp

doi:10.1117/12.505884

22 December 2003 Important considerations when using the Shack-Hartmann method for testing highly aspheric optics

Daniel G. Smith, Eric Goodwin, John E. Greivenkamp

Proceedings Volume 5180, Optical Manufacturing and Testing V; (2003) https://doi.org/10.1117/12.505884
Event: Optical Science and Technology, SPIE's 48th Annual Meeting, 2003, San Diego, California, United States

Abstract

The Shack-Hartmann (S-H) method is a good candidate for general aspheric metrology because the lenslet array can be designed to accommodate the dynamic range associated with wildly aspheric wavefronts. However, when the S-H method is used in this fashion several issues must be taken into consideration. First, while the sensitivity and dynamic range of the instrument can be increased by allowing the spots to shift several lenslet sub-apertures, real lenslets are not thin lenses with zero aperture so the spots will not shift in exact proportion to the average phase gradient across the lenslet as is commonly expected. Second, if the wavefront is sufficiently aspheric, any relay optics will induce additional aberrations, which can be accounted for with proper calibration and reverse raytracing. Another limitation of the S-H method is that spots cannot overlap or cross. While this is a limitation on the divergence of the phase distribution or wavefront curvature the problem can be avoided if we guarantee that the beam has no caustic between the lenslet array and detector. Finally, the single biggest problem in aspheric metrology is losing the light or vignetting. One general way to address this problem is to image the part onto the lenslet array with a large numerical aperture. In this way, rays leaving the part can have some range of angles that are guaranteed to make it through the system. This presentation will discuss these issues and methods for overcoming them. Experimental results will also be presented to demonstrate the effects.

Citation Download Citation

Daniel G. Smith, Eric Goodwin, and John E. Greivenkamp "Important considerations when using the Shack-Hartmann method for testing highly aspheric optics", Proc. SPIE 5180, Optical Manufacturing and Testing V, (22 December 2003); https://doi.org/10.1117/12.505884

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available