Paper
29 July 2004 The investigation of carbon-nanotube-based polymers for improved structural damping
Xu Zhou, Kon-Well Wang, Charles Bakis
Author Affiliations +
Abstract
In this paper, experimental and analytical investigations are conducted on the energy dissipation of polymeric composites containing carbon nanotube fillers. The specimens are fabricated by directly mixing single-walled carbon nanotubes into two types of representative polymers, a stiff resin system (Epon 9405/Epodil 749/Ancamine 9470) and a soft resin system (D.E.R. 383/Epodil 748/Ancarez 2364/Ancamine 2384), with high-power ultrasonic agitation. To characterize loss factors, uniaxial testing with harmonic loading is conducted to directly measure the phase lag between stress and strain. The loss factors are measured using different material deformations. The present paper also presents an energy loss model by addressing nanotube/resin interfacial friction. The concept of “stick-slip” motion caused by frictional contacts between nanotubes and resin is proposed to describe the load transfer behavior. Energy dissipation and loss factor are characterized through the work done by interfacial friction. The trends of strain-dependent loss factors obtained from experiments and analysis are compared.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xu Zhou, Kon-Well Wang, and Charles Bakis "The investigation of carbon-nanotube-based polymers for improved structural damping", Proc. SPIE 5386, Smart Structures and Materials 2004: Damping and Isolation, (29 July 2004); https://doi.org/10.1117/12.538624
Lens.org Logo
CITATIONS
Cited by 17 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Composites

Single walled carbon nanotubes

Polymers

Ultrasonics

Epoxies

Electroluminescence

Phase measurement

Back to Top