Paper
29 September 2004 Design and commissioning experience of SALT facility
Mariana De Kock, Sarel Venter
Author Affiliations +
Abstract
The commissioning experience of the facility for SALT is compared to the results of the analysis done during the design. A false steel floor incorporating forced ventilation that extends around the telescope azimuth pier is installed to prevent heat radiating from the concrete surfaces on nights when the ambient temperature drops to below room temperature. An infrared scan was done on this floor to verify that no heat is radiated into the telescope chamber from either the concrete or the warmer rooms underneath. The SALT site is windy all year round, and in order to utilize this natural resource and get better ventilation, adjustable louvers are used for natural ventilation. The control system automatically adjusts the louver openings depending on the wind speed and relative direction of the dome opening to achieve enough air changes during wind still nights. The louvers are throttled to limit windshake on the structure on windy nights. Results of the computational fluid dynamic analysis (CFD) and actual measurements are presented showing adequate temperature distribution at low wind speeds. The correlation between the CFD and actual measurements are discussed, with reference to the surface and air temperatures in the telescope chamber under different ambient conditions. The telescope chamber and dome are built out of insulation panels to limit energy losses during the day when the chamber is air conditioned. It also ensures thermal inertia of the building is low and consequently allows its temperature to react quickly to changes in external ambient temperature. The correlation between the expected and actual capacity of the air conditioners are also discussed.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mariana De Kock and Sarel Venter "Design and commissioning experience of SALT facility", Proc. SPIE 5495, Astronomical Structures and Mechanisms Technology, (29 September 2004); https://doi.org/10.1117/12.551471
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Telescopes

Mirrors

Space telescopes

Temperature metrology

CFD analysis

Infrared telescopes

Optical instrument design

RELATED CONTENT


Back to Top