Paper
16 September 2004 The VLTI Auxiliary Telescope System: a big challenge for a small company
Carlo Flebus, Pierre Gloesener, Bertrand Koehler
Author Affiliations +
Abstract
AMOS S.A. is a small company specialised in the fields of opto-mechanical, thermal and vacuum technology. To develop, manufacture and test the ESO VLTI Auxiliary Telescope System (ATS) was considered internally as a big challenge. ATS is a large-sized project and difficult to manage for a small company (since ATS, AMOS has hired about 25 people and now employs about 60 people). ATS is also technically a very complex system because of the following reasons: • Unusual telescope (mobile telescope) • Very tight system performances (e.g. Image quality, OPD, Pointing) • Severe design constraints because of existing site interfaces (e.g. volume, mass) and environment (including wind and earthquake) • Multidisciplinary engineering system (mechanical, optical, electrical, thermal, pneumatic, hydraulic) This paper describes how this project has been managed in practice by AMOS and also the important role of the system engineering. The last paragraph will be dedicated to the main lessons learned.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Carlo Flebus, Pierre Gloesener, and Bertrand Koehler "The VLTI Auxiliary Telescope System: a big challenge for a small company", Proc. SPIE 5497, Modeling and Systems Engineering for Astronomy, (16 September 2004); https://doi.org/10.1117/12.551266
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Telescopes

Image quality

Interfaces

Optical instrument design

Systems engineering

Manufacturing

Error analysis

RELATED CONTENT

Technical description of the U.K. large telescope
Proceedings of SPIE (July 01 1990)
Systems engineering: application to VISTA design
Proceedings of SPIE (September 16 2004)
Design and development of the fibre cable and fore optics...
Proceedings of SPIE (September 24 2011)
Tests of a high-resolution three-mirror anastigmat telescope
Proceedings of SPIE (December 28 1999)
Design of the unit telescopes of the MROI
Proceedings of SPIE (July 28 2008)

Back to Top