Paper
17 January 2005 Curved focal plane compensation design for surveillance system
Zhonghua Fang, Dapeng Li, Guilin Chen
Author Affiliations +
Abstract
With the development of high performance focal plane arrays (FPAs) which provide very good sensitivity, operability, and excellent image quality, FPAs are applicable to wide-field-of-view, long range surveillance and targeting missions. However, many applications, like space- and air-borne surveillance telescopes, emphasize wide field of view (FOV) over resolution, permitted the most rapid survey of the entire field of regard. This is typically limited by large, complex, and costly corrector optics to flatten the wavefront. An alternative approach is to design a curved focal plane to alleviate the designing burden of optical system. Conventional approach is by the way of providing the ability to produce FPAs with a specified degree of curvature while preserving required electro-optical characteristics. This paper presents a novel method by utilizing spot-to-curved-line converter based on normal FPAs.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhonghua Fang, Dapeng Li, and Guilin Chen "Curved focal plane compensation design for surveillance system", Proc. SPIE 5644, Optoelectronic Devices and Integration, (17 January 2005); https://doi.org/10.1117/12.576427
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical design

Space telescopes

Telescopes

Surveillance systems

Staring arrays

Surveillance

Glasses

RELATED CONTENT

Glass Choice Procedures For Periscope Design
Proceedings of SPIE (October 31 1986)
PLATO: detailed design of the telescope optical units
Proceedings of SPIE (August 05 2010)
Use Of Chalcogenide Glass In Thermal Infrared Telescopes
Proceedings of SPIE (September 16 1980)
Design and analysis of a spaceborne lidar telescope
Proceedings of SPIE (September 15 1995)

Back to Top