Paper
12 May 2005 Pupil optimization of incoherent imaging systems for improved CD linearity
Author Affiliations +
Abstract
The CD linearity error rather than other light beam characteristics, such as optical resolution, is only important for microlithography. Optimization of CD linearity can be achieved by proper design of optical system. The method of variations is used here for direct solution of the problem to get the optimal design, the best possible pupil function of final lens in particular. The resulting optimal design depends from the allowed CD linearity error threshold only. In particular, this theory shows that an i-line mask writer should be capable of writing sub-0.25 micron lines and spaces with less than 20 nm CD linearity error (for λ=413nm and NA=0.86). The optimization method can be used in different models of light propagation, vectorial Debye model is used here in particular. The method is computationally simple since it turns out to be an eigenvalue problem for linear system of equation. Various light polarizations can be utilized. The method is also applicable for partially coherent imaging systems.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Igor Ivonin and Torbjorn Sandstrom "Pupil optimization of incoherent imaging systems for improved CD linearity", Proc. SPIE 5754, Optical Microlithography XVIII, (12 May 2005); https://doi.org/10.1117/12.599789
Lens.org Logo
CITATIONS
Cited by 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Apodization

Critical dimension metrology

Imaging systems

Geometrical optics

Computing systems

Gaussian beams

Optical lithography

Back to Top