The OmniTread serpentine robot: design and field performance

Johann Borenstein; Grzegorz Granosik; Malik Hansen

doi:10.1117/12.601486

27 May 2005 The OmniTread serpentine robot: design and field performance

Johann Borenstein, Grzegorz Granosik, Malik Hansen

Proceedings Volume 5804, Unmanned Ground Vehicle Technology VII; (2005) https://doi.org/10.1117/12.601486
Event: Defense and Security, 2005, Orlando, Florida, United States

Abstract

This paper describes the design and performance of the OmniTread serpentine robot, developed at the University of Michigan. Serpentine robots are mobile robots that comprise of multiple rigid segments, connected by actuated joints. The segments usually have drive elements, such as wheels or tracks. To date, we have developed two versions of the OmniTread. The larger version, called OT-8, has five rigid segments and four 2-Degree-of-Freedom (2-DOF) joints, and it can drive through an 8-inch diameter opening. The OT-8 is fully functional and this paper documents experimental results for the OT-8. The smaller and newer version, called "OT-4," will have seven segments, six 2- DOF joints, and it will fit through a 4 inch diameter hole. The OT-4 is not yet completely built, but its design is mostly completed and key improvements over the OT-8 have been bench tested. The foremost and unique design characteristic of the OmniTread is the use of pneumatic bellows to actuate the joints. The pneumatic bellows allow the simultaneous control of position and stiffness for each joint. Controllable stiffness is of crucial importance in serpentine robots, which require stiff joints to cross gaps and compliant joints to conform to rough terrain for effective propulsion. Another unique feature of the OmniTread design is the maximal coverage of all four sides of each segment with driven tracks. This design makes the robot indifferent to roll-overs, which are bound to happen when the long and slen-der bodies of serpentine robots travel over rugged terrain.

Citation Download Citation

Johann Borenstein, Grzegorz Granosik, and Malik Hansen "The OmniTread serpentine robot: design and field performance", Proc. SPIE 5804, Unmanned Ground Vehicle Technology VII, (27 May 2005); https://doi.org/10.1117/12.601486

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available