Paper
12 October 2005 Comparative study for the DEM generation from RADARSAT stereoscopic data and topographic maps
Author Affiliations +
Abstract
Radar satellite images could be used to produce digital elevation model (DEM) of certain areas by processing a couple of images, covering the same area, obtained at two different angles. In this study, the DEM generated from the Canadian RADARSAT stereoscopic data for a north western area of the Gulf of Suez, Egypt, is compared to the DEM generated from the topographic contour maps, scale 1:50,000. An evaluation and assessment of the results were conducted. The study shows that the DEM derived from RADARSAT data has a high precision as compared to the one generated from the topographic maps. It is also accurate enough to provide information where other sources of digital elevation are not available.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ayman H. Nasr "Comparative study for the DEM generation from RADARSAT stereoscopic data and topographic maps", Proc. SPIE 5980, SAR Image Analysis, Modeling, and Techniques VII, 59800L (12 October 2005); https://doi.org/10.1117/12.620609
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Image processing

Raster graphics

Sensors

Radar

Satellites

Global Positioning System

Synthetic aperture radar

RELATED CONTENT

Detection of damage to building side walls in the 2011...
Proceedings of SPIE (October 17 2013)
A method of satellite image positioning based on refined RFM
Proceedings of SPIE (February 10 2023)
Rigorous geometric processing of airborne and spaceborne data
Proceedings of SPIE (December 30 1994)
Satellite SAR Geocoding For Earth Mapping
Proceedings of SPIE (July 25 1989)

Back to Top