Paper
27 January 2006 A prototype system for 3D measurement using flexible calibration method
Author Affiliations +
Proceedings Volume 6056, Three-Dimensional Image Capture and Applications VII; 60560X (2006) https://doi.org/10.1117/12.642848
Event: Electronic Imaging 2006, 2006, San Jose, California, United States
Abstract
We developed a 3D measurement system consists of a camera and a projector which can be calibrated easily at short times. In this system, the camera and the projector are calibrated in advance with Zhang's calibration method. The measurement procedure in this system is as follows. A calibrated camera and a calibrated projector are put in front of the calibration plane. Then the relative pose between the camera and the projector can be computed by projecting a number of light patterns from the projector onto the calibration plane and taking those images with the camera. And this system performs a 3D measurement with the gray code pattern projection. Since this system can be calibrated easily, this system does not need to be fixed exactly and the configuration of this system, which is the baseline and the measurement range, can be changed freely depending on the target and the purpose. This system can obtain a range data in a high accuracy of an error about 0.1% in spite of the fact that this system can be calibrated easily.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Masanori Fukuda, Takeo Miyasaka, and Kazuo Araki "A prototype system for 3D measurement using flexible calibration method", Proc. SPIE 6056, Three-Dimensional Image Capture and Applications VII, 60560X (27 January 2006); https://doi.org/10.1117/12.642848
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cameras

Calibration

Projection systems

3D metrology

Imaging systems

3D modeling

Distortion

RELATED CONTENT


Back to Top