Paper
23 January 2006 Fabrication of 3D photonic crystal by deep x-ray lithography
Gang Liu, Yangchao Tian, Ying Xiong, Ya Kan
Author Affiliations +
Abstract
Three dimensions photonic crystals represent one of the most important building blocks towards the achievement of a full optics communication technology. Although several methods have been demonstrated to prepare 3D photon crystals, 3D photonic crystals still represent a challenge to a fabrication point of view. It is highly desirable that the fabrication of these 3D structures involves simple technologies. In this paper, a novel method has been developed to fabricate 3D photonic crystals structure. The process of multi deep X-ray lithography is: Firstly, the cube or cuboid of resist sample is shaped by lathe. Then, the microstructures are patterned by three times deep X-ray lithograph through three surfaces that are vertically each other. After development, the 3D PC structure is obtained. The 3D photonic crystals structures are fabricated to demonstrate this method. The result shows that this method can avoid many problems caused by tilt X-ray lithography and the lattice layer is enough to meet the requirement of 3D photonic crystals. It is simple and effective to realize the 3D photonic crystals structure by using multi deep X-ray lithography. And various 3D photonic crystals types and lattice defects can be achieved by using this method.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gang Liu, Yangchao Tian, Ying Xiong, and Ya Kan "Fabrication of 3D photonic crystal by deep x-ray lithography", Proc. SPIE 6110, Micromachining Technology for Micro-Optics and Nano-Optics IV, 61100R (23 January 2006); https://doi.org/10.1117/12.645585
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photonic crystals

X-ray lithography

Photomasks

Optical alignment

Lithography

X-rays

Photonic crystal devices

RELATED CONTENT

Submicron X-Ray Replication Technology For Early Application
Proceedings of SPIE (November 07 1983)
Regular microfilters based on PTFE
Proceedings of SPIE (June 25 1999)
Evaluation of a laser-based proximity x-ray stepper
Proceedings of SPIE (July 09 1992)
Tilted logpile photonic crystals using the LIGA technique
Proceedings of SPIE (September 05 2006)

Back to Top