Paper
28 February 2006 Application of parallel optical axis converting waveguide to optoelectronic-PWB
T. Tanaka, H. Nanai, H. Sakamoto, N. Takanobu, Y. Yamamoto, I. Yamauchi, S. Sakaguchi
Author Affiliations +
Abstract
We demonstrate for the first time a high-speed parallel optical signal transmission using multi-channel optical axis converter having U-shape optical paths (AXC-U), which has been developed to apply to optical printed wiring board (OPWB). AXC-U developed here contains 4-channel multimode waveguides, which have vertical waveguides and 45-degree mirrors connected at both ends of horizontal waveguides using to form U-shape optical paths. The AXC-U accommodates VCSEL and PD arrays, which are surface-mounted on each end to perform optical coupling to vertical waveguides in a manner of passive alignment and flip-chip bonding. The waveguides in AXC-U have a horizontal waveguide length of 2 cm, a vertical waveguide length of 100 μm, a cross section of 40x40 μm, a numerical aperture of 0.25 and an insertion loss of less than 2.5 dB. We performed a parallel optical signal transmission experiment using this AXC-U and succeeded in 4-channel parallel transmission at a data rate of 10 Gb/s/ch.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
T. Tanaka, H. Nanai, H. Sakamoto, N. Takanobu, Y. Yamamoto, I. Yamauchi, and S. Sakaguchi "Application of parallel optical axis converting waveguide to optoelectronic-PWB", Proc. SPIE 6126, Photonics Packaging and Integration VI, 61260C (28 February 2006); https://doi.org/10.1117/12.645447
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Vertical cavity surface emitting lasers

Mirrors

Optics manufacturing

Photography

Signal attenuation

Optoelectronics

RELATED CONTENT


Back to Top