Optimization of dual BARC structures for hyper-NA immersion lithography

Nobuyuki N. Matsuzawa; Boontarika Thunnakart; Ken Ozawa; Yuko Yamaguchi; Hiroyuki Nakano; Hiroichi Kawahira

doi:10.1117/12.651563

29 March 2006 Optimization of dual BARC structures for hyper-NA immersion lithography

Nobuyuki N. Matsuzawa, Boontarika Thunnakart, Ken Ozawa, Yuko Yamaguchi, Hiroyuki Nakano, Hiroichi Kawahira

Proceedings Volume 6153, Advances in Resist Technology and Processing XXIII; 61531J (2006) https://doi.org/10.1117/12.651563
Event: SPIE 31st International Symposium on Advanced Lithography, 2006, San Jose, California, United States

Abstract

For the purpose of finding feasible dual-BARC (Bottom Anti-Reflective Coating) parameters for immersion lithography that do not depend on the polarization of light, illumination conditions and pattern sizes and pitches, comprehensive optimizations of the dual-BARC parameters were performed. A computational code was developed that performs automatic and comprehensive optimizations of dual-BARC parameters under any kind of conditions. Margins of dual-BARC parameters, which assure the substrate reflectance to be lower than a desired value, were also estimated by using the code. Dual-BARC parameters to minimize the substrate reflectance were successfully obtained for the BARC formed on a silicon oxide and nitride layer for cases of NA being 1.0, 1.1, 1.2 and 1.3 to 1.4. The thickness of the silicon oxide and nitride layer was varied from 10 to 200 nm. It was found that the dual-BARC concept works up to NA = 1.1 and 1.4 for the BARC on a silicon oxide and a silicon nitride layer, respectively, although for the case of the dual BARC on a silicon oxide layer, the range of the thickness of the oxide layer where the dual-BARC concept works is limited. In addition, for both of the cases of the dual BARC on silicon oxide and nitride, it was calculated that the top-layer of the dual BARC has to be extremely thin. Feasibility of using a layer structure consisting of a planarization and hardmask layer as a reflection-control structure was also examined. This showed that this concept can work up to NA = 1.2 and 1.4 for the case on silicon oxide and nitride, respectively. Finally, a routine to optimize graded-BARC structure was successfully implemented into our computational code. By using the routine, advantages of the graded-BARC concept over the dual-BARC concept in terms of suppressing substrate reflectance were demonstrated.

Citation Download Citation

Nobuyuki N. Matsuzawa, Boontarika Thunnakart, Ken Ozawa, Yuko Yamaguchi, Hiroyuki Nakano, and Hiroichi Kawahira "Optimization of dual BARC structures for hyper-NA immersion lithography", Proc. SPIE 6153, Advances in Resist Technology and Processing XXIII, 61531J (29 March 2006); https://doi.org/10.1117/12.651563

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available