Uncooled IRFPA with chip scale vacuum package

Hisatoshi Hata; Yoshiyuki Nakaki; Hiromoto Inoue; Yasuhiro Kosasayama; Yasuaki Ohta; Hiroshi Fukumoto; Toshiki Seto; Keisuke Kama; Munehisa Takeda; Masafumi Kimata

doi:10.1117/12.673072

17 May 2006 Uncooled IRFPA with chip scale vacuum package

Hisatoshi Hata, Yoshiyuki Nakaki, Hiromoto Inoue, Yasuhiro Kosasayama, Yasuaki Ohta, Hiroshi Fukumoto, Toshiki Seto, Keisuke Kama, Munehisa Takeda, Masafumi Kimata

Author Affiliations +

Proceedings Volume 6206, Infrared Technology and Applications XXXII; 620619 (2006) https://doi.org/10.1117/12.673072
Event: Defense and Security Symposium, 2006, Orlando (Kissimmee), Florida, United States

Abstract

We have developed an uncooled IRFPA with a chip scale vacuum package and succeeded in obtaining excellent IR images of less than 60 mK in NETD. This package consists of a device chip and a silicon lid. The chip in this study is a 160 x 120 SOI diode IRFPA with a 25 μm pixel pitch. The size of the package is 14.5(L) x 13.5(W) x 1.2(H) mm. The gap between the device chip and the lid is controlled by the thickness of the vacuum sealing material. The lid is prepared by a wafer process and diced just before vacuum sealing. We use DLC (diamond like carbon) as the AR coat because of its high IR transmittance and high endurance in the wafer process. DLC films are deposited on both sides of the silicon lid wafer, and then a ring-shaped metal pattern for solder bonding is formed on one side of the lid wafer. Solder is mounted on the metal pattern by a molten solder ejection method. The patterned thin-film getter is formed on the lid wafer. Because of the use of patterned thin-film getter, there is no need to form a cavity on the lid to allow installation of getter or to insert a spacer between the device chip and the lid. Then the lid wafer is diced into individual lids. The device wafer and the lids are set in a vacuum chamber, which has a heater to melt the solder, so as to pair each die and lid. After pumping the chamber, the patterned thin-film getters are activated and then the lids are bonded simultaneously to the device wafer. Finally the device wafer is diced into individual chips. The measured pressure of the package is less than 0.5 Pa which is sufficient for obtaining high thermal isolation. In this technique, only the good dies in a wafer are packaged in chip scale simultaneously. Thus, a reduction in the size and cost of the package has been achieved.

Citation Download Citation

Hisatoshi Hata, Yoshiyuki Nakaki, Hiromoto Inoue, Yasuhiro Kosasayama, Yasuaki Ohta, Hiroshi Fukumoto, Toshiki Seto, Keisuke Kama, Munehisa Takeda, and Masafumi Kimata "Uncooled IRFPA with chip scale vacuum package", Proc. SPIE 6206, Infrared Technology and Applications XXXII, 620619 (17 May 2006); https://doi.org/10.1117/12.673072

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available