Small satellite thermal design, test, and analysis

Millan F. Diaz-Aguado; Jamin Greenbaum; Wallace T. Fowler; E. Glenn Lightsey

doi:10.1117/12.666177

31 May 2006 Small satellite thermal design, test, and analysis

Millan F. Diaz-Aguado, Jamin Greenbaum, Wallace T. Fowler, E. Glenn Lightsey

Proceedings Volume 6221, Modeling, Simulation, and Verification of Space-based Systems III; 622109 (2006) https://doi.org/10.1117/12.666177
Event: Defense and Security Symposium, 2006, Orlando (Kissimmee), Florida, United States

Abstract

There has been a recent increase in emphasis on small satellites because of their low cost, short development times, relative simplicity, and cost efficiency. However, these satellites do have drawbacks. Their small size results in small surface areas which often translate into thermal and power constraints. A small satellite may not have enough surface area for radiators and/or solar panels. The radiators are used to release internal heat during hot environments, and solar panels create necessary power for the heaters during cold environments. Because of the surface area and power limitations, a passive thermal design was then selected for the Formation Autonomy Spacecraft with Thrust, Relative Navigation, Attitude, and Crosslink Program (FASTRAC) twin satellites, built by students at the University of Texas at Austin. Thermal cycling and thermal analysis were performed. The thermal cycling was done in Chamber-N at Johnson Space Center, Texas, using worst case hot and cold scenarios. The thermal analysis was conducted using Finite Elements (FE), and the results were compared to the test data and validated. FASTRAC is planned to be in a LEO orbit which ranges between 300km and 500km in altitude. The orbits were then simulated to determine the characteristics of the LEO orbits in which FASTRAC can survive.

Citation Download Citation

Millan F. Diaz-Aguado, Jamin Greenbaum, Wallace T. Fowler, and E. Glenn Lightsey "Small satellite thermal design, test, and analysis", Proc. SPIE 6221, Modeling, Simulation, and Verification of Space-based Systems III, 622109 (31 May 2006); https://doi.org/10.1117/12.666177

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available