Paper
8 May 2007 LIBS micro-analysis of solid aluminum samples by use of optical fibers as light guide
T. Stehrer, J. Heitz
Author Affiliations +
Proceedings Volume 6346, XVI International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers; 634626 (2007) https://doi.org/10.1117/12.738886
Event: XVI International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, 2006, Gmunden, Austria
Abstract
Solid Al alloy samples were analyzed by laser-induced breakdown spectroscopy (LIBS) either by employing an optical glass fiber as light waveguide or by direct laser irradiation in air. The samples had an Al content of 87.56 % to 99.2 % (w/w), a Si content of 0.07 % to 11.12 %, a Fe content of 0.15 % to 0.89 % and a Mg content of 0.005 % to 2.38 %. For the LIBS analyses, we used an Nd:YAG laser delivering 5 to 7 ns pulses with pulse energies from 50 to 500 mJ per pulse at a repetition rate of 10 or 20 Hz. The experiments were performed either at a wavelength of 1064 nm or (frequency doubled) at 532 nm. We obtained qualitatively similar results in experiments with direct laser irradiation in air and experiments where cleaved fibers were used as a laser light guide. Damage of the fibers sets an upper limit for the laser energy in the latter case. Experiments employing tapered fibers showed that a lateral resolution in the order of 10 &mgr;m is feasible with the presented setup.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
T. Stehrer and J. Heitz "LIBS micro-analysis of solid aluminum samples by use of optical fibers as light guide", Proc. SPIE 6346, XVI International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, 634626 (8 May 2007); https://doi.org/10.1117/12.738886
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Aluminum

Laser induced breakdown spectroscopy

Fiber lasers

Silicon

Plasma

Glasses

Iron

Back to Top