Optimizing design of tool interpolating algorithm in NC system

Chuangwen Xu; Hualing Cheng; Baodong Li

doi:10.1117/12.716988

24 October 2006 Optimizing design of tool interpolating algorithm in NC system

Chuangwen Xu, Hualing Cheng, Baodong Li

Proceedings Volume 6357, Sixth International Symposium on Instrumentation and Control Technology: Signal Analysis, Measurement Theory, Photo-Electronic Technology, and Artificial Intelligence; 63571W (2006) https://doi.org/10.1117/12.716988
Event: Sixth International Symposium on Instrumentation and Control Technology, 2006, Beijing, China

Abstract

The line and arc is approached by broken line in point by point comparison interpolating algorithm. If the pulse (the distance of one step) is short enough, the precision is high enough. If the pulse is 0.01 and the feed speed is no more than 3000mm/min, the precision of point by point comparison interpolating algorithm is well enough to meet the needs. But if the pulse is 0.005mm to 0.001mm and the feed speed is more than 3000mm/min, the number of interpolating point is more and more. The CPU is busy with the value of moving coordinate calculate and the pulse of feed set and occupy more resource, so the problem of lag, out of step and creep by low speed in Multi-axis. Then speed of response and interpolating precision about the system is effect. In this paper, In view of the principle of point by point comparison method, advance the foundation deciding whether the middle point interpolation is the control forth step error of NC system, establish math model of inserting and compensation method, change and improve the function that judge error by interpolating method. According to the result of the example, the middle interpolation method make interpolation precision raise from 1 pulse equivalent to 0.5 pulse equivalent, and interpolation points are greatly reduced, respond velocity quicken and interpolation precision heighten.

Citation Download Citation

Chuangwen Xu, Hualing Cheng, and Baodong Li "Optimizing design of tool interpolating algorithm in NC system", Proc. SPIE 6357, Sixth International Symposium on Instrumentation and Control Technology: Signal Analysis, Measurement Theory, Photo-Electronic Technology, and Artificial Intelligence, 63571W (24 October 2006); https://doi.org/10.1117/12.716988

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available