Paper
30 October 2006 Research of labyrinth seals clearance test system based on optical fiber sensor
Jun Liu, Dongxing Qin, Qimei Wang, Zheng Dong
Author Affiliations +
Abstract
When light irradiates to a test part, the change of the position of the test part can make the intensity of the reflecting light alter accordingly, based on this mechanism of reflective light intensity modulation, a new scheme with optical-fiber displacement sensor is put forward to testing the tip clearance of labyrinth seals. By analysis and treatment of the data from calibration test in static condition, the relationship of the optical-fiber displacement sensor's output in static state and the position from the test part to the sensor are obtained, also influence of different environments to the response curves is analyzed. The results of the experiment show that the presented scheme is feasible, and the high measuring accuracy of the optical-fiber sensor can meet the prospective purpose.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jun Liu, Dongxing Qin, Qimei Wang, and Zheng Dong "Research of labyrinth seals clearance test system based on optical fiber sensor", Proc. SPIE 6358, Sixth International Symposium on Instrumentation and Control Technology: Sensors, Automatic Measurement, Control, and Computer Simulation, 63580M (30 October 2006); https://doi.org/10.1117/12.717780
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Reflectivity

Computing systems

Modulation

Semiconductor lasers

Teeth

Capacitance

RELATED CONTENT

High power ridge waveguide DFB and DFB MOPA lasers at...
Proceedings of SPIE (February 12 2010)
Fiber Bragg grating cavity sensor based on a self seeded...
Proceedings of SPIE (October 03 2006)
A Non Invasive Fibre Optic Pick Up For A Turbine...
Proceedings of SPIE (October 06 1986)
Large-scale sensing arrays based on fiber Bragg gratings
Proceedings of SPIE (February 14 2002)
Width measurement of cold-rolling strip
Proceedings of SPIE (August 01 1991)

Back to Top