Paper
13 November 2007 Study on micro-hardness of electroless composite plating of Ni-P with SiC nano-particles
Yong Sun, Zhaoguo Zhang, Jiamin Li, Donghui Xu
Author Affiliations +
Proceedings Volume 6423, International Conference on Smart Materials and Nanotechnology in Engineering; 64235G (2007) https://doi.org/10.1117/12.780124
Event: International Conference on Smart Materials and Nanotechnology in Engineering, 2007, Harbin, China
Abstract
In this paper, a Ni-P electroless composite coating containing nano SiC particles was produced. The wearability of the composite coating was studied. Temperature, PH of the plating liquid and the concentration of SiC nanoparticles in the plating liquid were taken as parameters and the experiment with three factors and five levels was designed through the method of quadratic orthogonal rotation combination. SiC nanoparticles were dispersed by ultrasonic. The influence of the testing parameters on the hardness of the coating was studied intensively. The optimal parameters were obtained when the temperature is 86±1°C, PH is 6±0.5 and the concentration of SiC nanoparticles is 6g/L. The maximal hardness of the coating is over 1700HV after heat treatment.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yong Sun, Zhaoguo Zhang, Jiamin Li, and Donghui Xu "Study on micro-hardness of electroless composite plating of Ni-P with SiC nano-particles", Proc. SPIE 6423, International Conference on Smart Materials and Nanotechnology in Engineering, 64235G (13 November 2007); https://doi.org/10.1117/12.780124
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Coating

Composites

Plating

Silicon carbide

Particles

Mathematical modeling

Heat treatments

Back to Top