Paper
20 March 2007 Hybrid micro-optical system integration by laserbeam soldering
Erik Beckert, Ramona Eberhardt, Henrik Banse, Andreas Tünnermann, Frank Buchmann, Matthias Fettke
Author Affiliations +
Abstract
Longterm stable and high precise interconnections between small optical components and the optomechanical platform are mandatory for the assembly of complex and miniaturized optoelectronical systems. The approach discussed in this paper is to integrate optics and electronics on a common platform that is a ceramic Printed Circuit Board with embedded mounting structures for easy passive alignment of the optical components. Active alignment with higher accuracy can also be used, in both cases laserbeam soldering is the preferred and precise joining technology. Thin solder layers as well as solder bumps are used to create joints with an accuracy <±0.5 &mgr;m, suitable for singlemode coupling applications.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Erik Beckert, Ramona Eberhardt, Henrik Banse, Andreas Tünnermann, Frank Buchmann, and Matthias Fettke "Hybrid micro-optical system integration by laserbeam soldering", Proc. SPIE 6459, Laser-based Micro- and Nanopackaging and Assembly, 645904 (20 March 2007); https://doi.org/10.1117/12.699882
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Aspheric lenses

Fiber lasers

Laser welding

Ceramics

Electronics

Optical components

Optical mounts

Back to Top