Development of high-performance multi-layer resist process with hardening treatment

Yoshiharu Ono; Takeo Ishibashi; Atsumi Yamaguchi; Tetsuro Hanawa; Masahiro Tadokoro; Kazunori Yoshikawa; Kazumasa Yonekura; Keiko Matsuda; Takeshi Matsunobe; Yasushi Fujii; Takeshi Tanaka

doi:10.1117/12.707615

2 April 2007 Development of high-performance multi-layer resist process with hardening treatment

Yoshiharu Ono, Takeo Ishibashi, Atsumi Yamaguchi, Tetsuro Hanawa, Masahiro Tadokoro, Kazunori Yoshikawa, Kazumasa Yonekura, Keiko Matsuda, Takeshi Matsunobe, Yasushi Fujii, Takeshi Tanaka

Author Affiliations +

Proceedings Volume 6519, Advances in Resist Materials and Processing Technology XXIV; 65192O (2007) https://doi.org/10.1117/12.707615
Event: SPIE Advanced Lithography, 2007, San Jose, California, United States

Abstract

In the manufacture of devices beyond the 45 nm node, it is important to employ a high-performance multi-layer resist (MLR) process that uses silicon containing ARC (Si-ARC) and spin on carbon (SOC). We examined an additional hardening process of SOC by H₂ plasma treatment in order to improve the etching durability of the MLR. The dry etching durability of H₂-plasma-hardened SOC film showed a drastic improvement, while the wiggling features of the MLR without H₂ treatment observed after SiO₂ etching disappeared completely. The hardening mechanism of SOC was analyzed by Fourier transform infrared spectroscopy (FTIR) with gradient shaving preparation (GSP) and Raman spectrometry. The formation of diamond-like amorphous carbon at a depth of approximately 50 nm was observed and was attributed to the improvement in the dry etching durability. In addition, the MLR stack with hardening has good reflectivity characteristics. The simulated reflectivity at the interface between the bottom of the resist and top surface of the MLR stack with hardening below 0.6% was attained over a wide range of Si-ARC thicknesses and hyper NA (~1.3) regions. The measured refractive indices of the hardened SOC film at 193 nm had a high value at the surface; however, they gradually decreased toward the inner region and finally became the same as those of untreated SOC. This might be the origin of the estimated excellent reflectivity characteristics.

Citation Download Citation

Yoshiharu Ono, Takeo Ishibashi, Atsumi Yamaguchi, Tetsuro Hanawa, Masahiro Tadokoro, Kazunori Yoshikawa, Kazumasa Yonekura, Keiko Matsuda, Takeshi Matsunobe, Yasushi Fujii, and Takeshi Tanaka "Development of high-performance multi-layer resist process with hardening treatment", Proc. SPIE 6519, Advances in Resist Materials and Processing Technology XXIV, 65192O (2 April 2007); https://doi.org/10.1117/12.707615

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available