Ultrasonic plate waves for fatigue crack detection in multi-layered metallic structures

Eric Lindgren; John C. Aldrin; Kumar Jata; Brett Scholes; Jeremy Knopp

doi:10.1117/12.714764

11 April 2007 Ultrasonic plate waves for fatigue crack detection in multi-layered metallic structures

Eric Lindgren, John C. Aldrin, Kumar Jata, Brett Scholes, Jeremy Knopp

Proceedings Volume 6532, Health Monitoring of Structural and Biological Systems 2007; 653207 (2007) https://doi.org/10.1117/12.714764
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2007, San Diego, California, United States

Abstract

A representative area of concern for fatigue crack growth in aircraft occurs in multi-layered metallic structures. Ultrasonic plate waves are currently being investigated by multiple initiatives to detect these types of flaws with a minimal number of sensors to enable Structural Health Monitoring (SHM). Previous work has focused on structures with one or two layers, coupled with modeling of the wave propagation within these representative samples. However, it is common for multi-layered structures to have more than two layers in many areas of interest. Therefore, this study investigates ultrasonic wave propagation and flaw detection in a multi-layered sample consisting of 2 to 4 total layers with fatigue cracks located in only one layer. The samples contain fastener holes configured as would be expected to find on typical aircraft structure. The flaws in this study are represented by electric discharge machined (EDM) notches. Preliminary measurements show that EDM notches can be detected by the guided ultrasonic waves, but that the sensitivity to EDM notch location is dependent on the boundary conditions of each layer. The boundary conditions are changed by applying various loads on the surface of each layer by tightening and loosening the fasteners that hold the sample together. This variation depicts representative conditions found of aircraft. The experimental results are supplemented by modeling of the guided wave propagation within the structure using the Finite Element Method. The primary parameter studied in the modeling effort is the effect of the changes in the boundary condition on the mode and amplitude of the guided wave. The results of this investigation establish some guidelines for the use of guided waves in multi-layered structures, plus challenges that exist for their use in SHM applications and strategies to address these challenges.

Citation Download Citation

Eric Lindgren, John C. Aldrin, Kumar Jata, Brett Scholes, and Jeremy Knopp "Ultrasonic plate waves for fatigue crack detection in multi-layered metallic structures", Proc. SPIE 6532, Health Monitoring of Structural and Biological Systems 2007, 653207 (11 April 2007); https://doi.org/10.1117/12.714764

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available