10 April 2007Observations of crystalline structures occurring in the tape obtained with the melt-spinning method from the alloy with elastic memory Ti50Ni25Cu25
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
In the article the results of diffractometric, calorimetric research as well as the chemical constitution have been presented.
The research was carried out on the samples made of a thin amorphous tape made with the melt-spinning method
from the alloy revealing the memory Ti50Ni25Cu25 effect. The samples were subjected to annealing at different parameters
of holding in temperature. After the heat treatment, the response of martensite transformation and formed crystal structures
has been observed. The X-ray microstructural tests showed forming so-called outer (top) "free" layer of lamellar
precipitation of the high level of coherence.
Teodor Breczko andJanusz Szczepanek
"Observations of crystalline structures occurring in the tape obtained with the melt-spinning method from the alloy with elastic memory Ti50Ni25Cu25", Proc. SPIE 6597, Nanodesign, Technology, and Computer Simulations, 65970R (10 April 2007); https://doi.org/10.1117/12.726772
ACCESS THE FULL ARTICLE
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
The alert did not successfully save. Please try again later.
Teodor Breczko, Janusz Szczepanek, "Observations of crystalline structures occurring in the tape obtained with the melt-spinning method from the alloy with elastic memory Ti50Ni25Cu25," Proc. SPIE 6597, Nanodesign, Technology, and Computer Simulations, 65970R (10 April 2007); https://doi.org/10.1117/12.726772